Traditionally, the PIX required a NAT translation for traffic flowing from one interface to another. Beginning with 7.0, this is no longer the case. The introduction of the nat-control command means that you can configure your PIX or ASA to allow traffic to flow across the security appliance without nat.
When nat-control is enabled [...]

We’ve noticed a number of people arriving at the site with search keywords like “dmvpn asa”. This post is for you:
You folks will probably be disappointed to hear that DMVPN is not supported on the ASA. DMVPN is only supported on IOS routers. So what now? Well, if you’re [...]

I configured remote access VPN last night on a Cisco Router with the firewall feature set. No big deal right? My config was a little non traditional because I was applying the crypto map to the DMZ interface vs the internet facing interface. I had to do this because I didnt have the ability to [...]